Home > Gunsmithing Tools > Muzzle Crowning Tools >

Squirrel Daddy Aluminum Muzzle Crown Lapping Tool Bulk pack of 6
Muzzle Crown Aluminum Lapping  Tool bulk
Our Price: $14.95

Stock Status:(Out of Stock)

Availability:: Usually Ships in 24 Hours
Product Code: SD20-231

Micro Finish Muzzle Crown Lapping tools
Cost saving aluminum body
Quantity 6
Works in any 1/4 or larger drill chuck.

To get a really smooth crown use a different grit
compound for each lap tool. This is important because
the compound embeds itself into the aluminum, so if you
just used 220 grit and use the same tool with 600 grit for
a micro fine finish forget it. The large 220 grit
particles are embedded into the aluminum so you will
never get a good micro finish. Use a fresh lap for
each grit as you step down for the best results, then
mark them for future use.

These are only used for finish work after the crown
is cut to dimension with a steel cutter.

This is a consumable item so expect wear, they
are made from aluminum.

Browse for more products in the same category as this item:

Gunsmithing Tools > Muzzle Crowning Tools